Αλλαγή φρένων σε παλιά κούρσα

7 σχόλια / 0 νέα/ο
Τελευταία δημοσίευση
srekoble
Απών/απούσα

Γεια σας παιδιά,
γνωρίζει κανείς που μπορούν να βρεθούν "διπλά" φρένα για ποδήλατο κούρσας? Εχω ένα peugeot carbolite του 82 αλλά με έχει κουράσει η συνεχόμενη σκυφτή στάση πάνω στο ποδήλατο και για να μην χαλάσω την εικόνα του και την ιστορία του σαν κούρσα ψάχνω κάτι τέτοιο (βλέπε εικόνα..).

http://rebike.gr/images/stories/peugeot.jpg

όπως βλέπετε η μανέτα κάνει ένα ( Γ) και πατιούντε ταυτόχρονα και τα κάτω και τα πάνω φρένα όποτε μπορείς να είσαι κ στην πιο άνετη θέση πόλης. Το θέμα είναι μπορούν να βρεθούν αυτά τα φρένα κάπου? δεν έχω ιδέα ,αν ξέρει κανείς τίποτα ας μου πει.
ευχαριστώ

Αξιολόγηση: 
0
Η αξιολόγηση σας: Κανένα
0
0 ψήφοι
vagosxxxl
Εικόνα vagosxxxl
Απών/απούσα

Στους φίλους του ποδηλάτου έχει κομπλέ τιμόνι από παλιά κούρσα εγώ ζαχάρωνα τον λαιμό

ConteAlmaviva
Εικόνα ConteAlmaviva
Απών/απούσα

Ποιό πλοίο είναι αυτό στη φωτό;

Sonic
Εικόνα Sonic
Απών/απούσα

Ψαξε στο ebay έχει πολλά τέτοια

BITOFEVERYTHING
Απών/απούσα

την τριτη μετα τις 21:00 στην οδο επταχαλκου στο θησειο στους φιλους του ποδηλατου

srekoble
Απών/απούσα

sonic wrote:
Ψαξε στο ebay έχει πολλά τέτοια

πατούσα τόσο καιρό brakes αντί για brakes levers και δεν μου έβγαζε αυτό που ήθελα, εν τέλη βρήκα αυτό που ήθελα και σε φτηνή τιμή νομίζω ( 6 ευρώ ).

ευχαριστώ

abyss
Απών/απούσα

Aυτού του είδους τα πρόσθετα λεβιεδάκια ήταν γνωστά και ως suicide bars. Ιδού τι γράφει για αυτά ο Sheldon:

Quote:
Extension levers
In the early 1970s, many people bought bicycles with drop handlebars, for reasons of fashion, even though drop bars did not suit their casual riding style. Given the frame and stem designs commonly available at the time, it was generally impossible to get drop handlebars high enough up to allow a low-intensity rider to reach the drops comfortably.

The problem was worse for many women, whose shorter torso made it hard to reach forward to the drops. Though a taller handlebar stem with less forward reach might be installed, this often did not occur. Also, small hands could not comfortably grasp typical drop-bar brake levers of that time.

Dia Compe invented bolt-on extensions that allowed Weinmann-type brake levers to be operated from the tops and middle of the handlebars, making this type of bar bearable for casual cyclists, since they never had to use the drops. This was so popular that Weinmann traded licensing with Dia Compe, so that each could copy the other's products.

(Stem shifters were also popularized around the same time, and for the same reason.)

This system has several drawbacks:

* The extension lever partially applied the main brake lever, reducing the available lever travel. Not all brands/models suffered from this, but the most common ones did.
* The attachment hardware precluded the use of the top of the brake lever hood as a comfortable riding position.
* They encouraged the practice of riding with the hands on the top, middle section of the bar, which is a position that doesn't give very secure control, especially on bumpy surfaces, because the hands are too close together.
* The hardware that held the extension levers to the main levers was prone to fall off.

Other manufacturers produced similar systems, some of which addressed some of these difficulties.

Extension levers are sometimes known as "safety levers." Since many people believe they actually reduce safety, the slang terms "death grips", "suicide levers" and "turkey wings" are occasionally substituted.

In the early 21st century, an greatly improved system of "interrupter brake levers " appeared, with all of the advantages and none of the drawbacks of the older extension levers. These also have the advantage of being compatible with modern "æro" brake levers which work a lot better than the older style levers that had the cables coming out of the tops.

contact